SHR Tru-Billet Shift Boot Adapter (Tube Style) for 2005-2014 Mustang / S197-522T



Looking to change out your Mustang’s stock shifter ball with a little more class, but don’t want to eliminate the stock shifter boot? SilverHorse Racing’s Tru-Billet Shift Boot Adapters are right for you. These shift boot adapters will allow you to use any aftermarket shifter ball, or along with our SHR shifter ball. No tools are required for the installation. Works with factory manual shifters with a 12mm x 1.25 thread pattern shift handle.

Most Mustangs will use the pawn-style adapter, but if your car has a small diameter top on the boot, then our tube style adapter will work for you. ** NOTE: 2010-2014 GT500 have a different size thread, as 2010-2014 cars use M10 x 1.25 – please specify in the options if you have a 2010-14 GT500! ** ** NOTE: Our Tube Style Adapter fits for 401A (chrome bezel on boot) equipped cars without modification! Our tube adapter slips inside of chrome trim ring on boot!**

Additional information

Weight1 lbs
Dimensions9 × 5 × 2 in
Please select required finish to add to cart

Pawn Style Silver Anodized Finish, Pawn Style Black Anodized Finish, Pawn Style Triple Chrome Plated, Silver Anodized Finish, Black Anodized Finish, Triple Chrome Plated, Silver Anodized Finish – SHELBY GT500, Black Anodized Finish – SHELBY GT500, Triple Chrome Plated – SHELBY GT500


SilverHorse Racing

Installation Time

(approx) 5 minutes

Difficulty level


Primary Material


Ships From

Our Florida location


Installation Instructions

13 reviews for SHR Tru-Billet Shift Boot Adapter (Tube Style) for 2005-2014 Mustang / S197-522T

  1. Anonymous

    Excellent quality and chrome finish. I had to cut off the bottom lip to fit the 401A shifter boot chrome ring. Perfect fit after modification for the 401A interior option.

  2. Anonymous

    I received my shift boot retainer on Saturday afternoon. It was certainly worth the wait!! The quality of the chrome and the fit and finish surpassed my expectations. Coupled with my new rally style shift knob they really match/dress up the interior of my Mustang. The best part is that your adapter was actually less expensive with better quality than the black one I had ordered from a different vendor.

    Thank you very much for offering such a great product.

  3. Anonymous

    Boot retainer worked great with my aftermarket shift knob. Looks very good. I would recommend item (401a interior on my car).

  4. Anonymous

    I got the Pawn Style with black anodized finish for my 2014 GT. It fit great and is very well made and finished. I purchased one similar to this from American Muscle and it would not fit over the shaft of my shifter. So they sent me another, and another after that and none of them would work. So I ordered this one from Silverhorse and it worked like a charm the first time. Thanks for a great product.

  5. Anonymous

    Excellent quality product! I love the appearance and feel of this retainer. The fit and finish is excellent. I ordered this to replace a retainer that came with a shift knob I ordered from a different vendor. I ordered the black anodized pawn style, it goes great with a black shift knob and the black interior of a 2014 GT. Did not care at all for the one I had previously, love this one. Great Product!

  6. Anonymous

    Great adapter. Best I could find to match my knob and the pawn-style flows nicely from the boot to the knob. Much better than shaft-type adapters. Quick shipping. Great product.

  7. Anonymous

    Had to wait for it as it was on backorder but fit perfect.

  8. Anonymous

    Simply awesome! After wasting money with CJ pony on a pawn style for my 14 GT (401a package) and didn’t fit, I decided to go with SHR. They replied pretty quick to my to email inquiry and recommended their tube style for my particular setup. The install was a breeze. And I am absolutely satisfied with the finished product. I would definitely recommend these guys to any other enthusiast looking to trick out their shifter.

  9. Anonymous

    I purchased this shift boot adapter in chrome to match the chrome ring on the top of my shifter boot and to allow the use of a different shifter ball I received when I purchased a new shifter for my 2014 GT with the 401A interior package. This adapter allows you to eliminate the stock aluminium shift ball. Silver Horse Racing was a pleasure to deal with and the adapter is certainly a quality piece with perfect fit and finish. Shipping was also very fast. I look forward to purchasing more products from SHR.

  10. Anonymous

    Looks great and fits perfectly definitely recommend this product but the paint is slightly lacking but can’t tell when it’s on.

    * SHR Response * Part is anodized, not painted, and that is why it is not as deep a black as a painted product would be – this is natural for the finish.

  11. Anonymous

    I ordered the boot adapter in chrome. I was quickly contacted and informed that they were back order, but they had other finish options available. So, I requested the silver finish. It arrived quickly and is a nice piece.

  12. Dan W Davis

    Purchased the chrome pawn style for my 09 GT. Great craftmanship, and nice folks to deal with.

    • SilverHorse Racing

      Hello Dan. We’re thrilled to hear you’re happy with the product and service you received. Thanks for the great feedback, we appreciate it!

  13. Dan W Davis

    Great Quality

    • SilverHorse Racing

      Yes sir! Raw American materials, manufactured into American automotive parts, made right here in America. Quality over compromise.
      We’re happy, you’re happy! Thanks for the excellent feedback.

Add a review

Your email address will not be published. Required fields are marked *