Fog Light Wiring H11 to Deutsch/H11 –Dual Adapter – Set / SKP-5011-2

$39.99

Looking for a way to connect LED cube lights without removing your factory fog lights or installing a separate wiring harness? Now available is a plug-n-play solution from Starkey. This wiring adapter will connect Deutsch 2-pin connectors to your factory fog light wiring without the need to disconnect your factory fog lights! Skip the hassle of installing a separate wiring harness for LED cube lights with these simple adapters!

If you only need to connect a total of 2 LED cube lights, see Starkey #5011

Do you need to connect 4 LED cube lights? See Starkey #5011DUAL

Features and Benefits:

  • Only high-quality weatherproof connectors are used.
  • No cutting or splicing required – just plug the new adapters in and you’re done.
  • Adapter connects to factory H11 bulb and splits into H11 connector/ Deutsch DT Series 2-pin connector.
  • 40 inch adapters give you flexibility in mounting your LED lights.

Fitment:

  • 2012-2019 Toyota Tacoma with factory fog lights
  • 2014-2019 Toyota Tundra with factory fog lights
  • 2011-2015 Ford Explorer with factory fog lights
  • 2014-2019 Jeep Grand Cherokee with factory fog lights
  • 2019-2020 Chevrolet Silverado/ Sierra 1500 New Body-Style
  • 2016-2019 Nissan Titan with factory fog lights
  • 2011-2015 Nissan Armada with factory fog lights
  • 2005-2015 Nissan Xterra with factory fog lights
  • 2005-2019 Nissan Frontier with factory fog lights
  • 2012-2019 Nissan NV with factory fog lights
  • Other models that utilize an H11 bulb connector

What’s Included:

  • One set (two adapters) with weatherproof connectors
  • Zip-ties to secure all wiring
  • 5 Year Limited Warranty

Reviews

There are no reviews yet.

Be the first to review “Fog Light Wiring H11 to Deutsch/H11 –Dual Adapter – Set / SKP-5011-2”

Your email address will not be published. Required fields are marked *

18 + 16 =

Installation:

  • Installation difficulty = Very Low
  • Installation time = 5 minutes
  • Tools required = None

Technical Specifications:

Works with virtually all aftermarket LED cube lights drawing less than 2.5 amps per light. Off-road use only.

*Depending on brand of LED cube lights used, the polarity of the wiring adapters may need to be reversed. No special tools are required. Instructions on reversing the polarity of the adapters are included with product.  

Existing customers must create a new account profile due to the improved security of our new website software