Fog Light Wiring H10 to Deutsch/H10 –Dual Adapter – Set / SKP-5010-2

$39.99

Looking for a way to connect LED cube lights without removing your factory fog lights or installing a separate wiring harness? Now available is a plug-n-play solution from Starkey. This wiring adapter will connect Deutsch 2-pin connectors to your factory fog light wiring without the need to disconnect your factory fog lights! Skip the hassle of installing a separate wiring harness for LED cube lights with these simple adapters!

Features and Benefits:

  • Only high-quality weatherproof connectors are used.
  • No cutting or splicing required – just plug the new adapters in and you’re done.
  • Adapter connects to factory H10 bulb and splits into H10 connector/ Deutsch DT Series 2-pin connector.
  • 40 inch adapters give you flexibility in mounting your LED lights.

Fitment:

  • 1999-2019 Ford F-Series Trucks with factory fog lights (F150, F250, F350, F450, F550)
  • 1999-2014 Ford Expedition
  • 2001-2011 Ford Ranger with factory fog lights (excluding 2007 with STX trim)
  • 2002-2010, 2016 Ford Explorer
  • 2000-2005 Ford Excursion with factory fog lights
  • 2003-2007 Chevrolet Silverado (1500, 2500, 3500 old body style only)
  • 2012-2018 Dodge Ram (trucks without projector headlights)
  • 2005-2009 Dodge Dakota
  • 2007-2009 Jeep Wrangler with factory fog lights
  • 2003-2010 Jeep Grand Cherokee
  • 2007-2013 Toyota Tundra with factory fog lights
  • 2005-2011 Toyota Tacoma with factory fog lights
  • Other models that utilize an H10 fog light bulb connector

What’s Included:

  • One set (two adapters) with weatherproof connectors
  • Zip-ties to secure all wiring
  • 5 Year Limited Warranty

Additional information

Shipping Weight .50 lbs
Shipping Dimensions 59 × 8 × 2 in

Reviews

There are no reviews yet.

Be the first to review “Fog Light Wiring H10 to Deutsch/H10 –Dual Adapter – Set / SKP-5010-2”

Your email address will not be published. Required fields are marked *

four × three =

Installation:

  • Installation difficulty = Very Low
  • Installation time = 5 minutes
  • Tools required = None

Technical Specifications:

Works with virtually all aftermarket LED cube lights drawing less than 2.5 amps per light. Off-road use only.

*Depending on brand of LED cube lights used, the polarity of the wiring adapters may need to be reversed. No special tools are required. Instructions on reversing the polarity of the adapters are included with product

Existing customers must create a new account profile due to the improved security of our new website software